structure for insulating glass production line

- Apr 23, 2018-

The structure of each device is an important factor in determining its function. The structure of the insulating glass production line is very complex. It is mainly divided into four aspects and the details can be understood together.


The cleaning water circuit system of the insulating glass production line is a circulation system, and its water tank is equipped with a constant-temperature water heating device, and the water temperature can be automatically maintained within a reasonable range.


Insulating glass production line mainly has four sections: infeed section, cleaning and drying section, inspection section and combined section.

The four sections are all erected with the same inclination angle, compact structure, economical and practical, high efficiency and easy maintenance.

The cleaning box is made of stainless steel, the transfer roller is an acid-resistant rubber roller; the glass cleaning can be conveniently observed through the plexiglass window at any time; the input section, cleaning and drying section are driven by a manual stepless speed motor, and the glass is optimized The speed runs smoothly.

The glass is supported and conveyed by the transfer rubber roller. The transfer roller is driven by the motor (roller segment motor) through the frequency converter through the sprocket. The glass enters the segment from the cleaning and drying stage at a low speed. After passing the inspection, it is accelerated to the next job. Segments, improve work efficiency;

The frequency conversion governor controls the running speed of the speed regulating motor in this segment, and the photoelectric switch controls the glass to enter the next working segment. In the drying section, the wind surface can be dried by using a high wind force to incline the air knife.

The inspection section is provided with a lamp tube, which can clearly inspect the cleaning quality of the glass; the combined section has a glass positioning and aluminum frame positioning device, and can complete the glass positioning, positioning and placement of the aluminum frame.

If you are interested in our products, please contact with us as following:

Shenzhen P-luck Machinery Technology Co,.ltd

No10-1, tongfuyu yongshengtai industrial park, Longtian Village, Kengzi town, Pingshan District, Shenzhen city

post code: 518112

contact person: lily shen