Pulse Electronics

Pulse Electronics

Power Transformer is used for used comply with the conditions specified in Article. The installation should be carefully checked before each parameter on the nameplate, after confirmation before installation. According to the label a good line, to check and correct you can power it. The...

Product Details

Power Transformer is used for used comply with the conditions specified in Article. The installation should be carefully checked before each parameter on the nameplate, after confirmation before installation. According to the label a good line, to check and correct you can power it. The transformer processes should be possible to avoid the collision, stored in dry and ventilated place, keep away from moisture, in order to ensure product performance and service life. It is a nice assistant device for manufactures.

 

tem Name

 Power transformer

Input Voltage  

 Rated Voltage ±5%

Output Voltage

 Rated Voltage ±5%

Environmental Temperature

 -15∼ +40

Frequency

 50Hz/60Hz

Phase

 Three Phase

Efficiency

 ≥95%

Insulation Resistance

 ≥20MΩ

Overload Capability

 For 1min under two times of rated current

Insulation Grade

 Grade B(130°C),Grade F(155°C),Grade H(180°C)

Noise

 <55dB

Customized

 Capacity can be customized


Working Environment:

· Ambient temperature:1.Maximum ambient air temperature does not exceed+40℃;2.24h average ambient air temperature does not exceed +30℃3.Ambient air temperature limit of not less than-5℃;

· Elevation :installation site altitude of not less than-5℃;

· Atmospheric conditions: relative humidity in the ambient air temperature is +40℃ not more than 50%, at lower temperature can have higher relative humidity, the wettest month average maximum relative humidity of 90%, while the monthly average minimum temperature of +25℃, and taking into account temperature changes occur when condensation on the surface of the product;

· Pollution degree: pollution levels for three;

· Installation category (over voltage category): installation category Ⅲclass;

· Supply voltage :supply voltage tolerance±5%;

· Installation conditions: installation in the absence of severe vibration and shock vibration. 


Workshop:

factory for transformer.jpg

 

Production application:

application.jpg

 

Shipping:

· Samples: will be prepared within seven days.

· Bulk order: around ten days.

· Large order:30 days will be OK.


Packaging:

· Carton packaging: Each energy meter are carefully packed out of the storehouse.

· Wooden case packing: The voltage stabilizer  are according to one or four packed in the box out of the storehouse.

· Honeycomb carton: As far as possible to the packaging to do better, And send to the hands of every guest.

 

If you are interested in our products, please contact with us as following:

image011.jpg


Inquiry