Hole Punch for Window Profiles is a common machine for window and door processing, and usually used for holes punching. It is easy for operation, low cost for training and maintain, and it assistants with dies for working. the operation is very smooth and no deform and furs. We design it one cylinder control one set of mould to make sure the punching machine has enough punch power, the machine can be control by two workers at same time, can help you save much time, and it is environmental-protected, no pollution, so more and more customers would like to use the punching machine and tooling to work with window and door
Specification about Hole Punch for Window Profiles:
PVC profiles and Aluminium
Engineer can be available on line in all day
Features and superiority:
1) Our worktable is much stronger than the other suppliers, as our steep square pipe is much thicker and we add solid steel into the square pipe, so that it can bear much punching pressure
2)the press machine speed is fast, it is easy to install and take off the moulds,no need to make new machine, just make new moulds to instead of the old ones our machine can last more than 10 years,so you can channge the moulds as your requirements
3) we use 24V foot pedals to make sure it is safe for customer’s use, and we would like to use the stainless steel sheet to cover the worktable, so that the machine can keep clean and easy to clean.
4) the point control punching can make sure the punch depth during work, to help you protect the tooling during machine punching down. Meanwhile , this design is very useful for testing the moulds during you install new moulds onto the machine.
5 )we use stronger plywood case to make our packing is enough strong for machine, meanwhile, we will add steel square pipes to the bottom of the case, fix the machine onto the bottom with the pipes, so that the machine is safe during shipping
6) more and more customers know us and have cooeprated with us, they are satisfied with our quality, design and service. Now our customers are distributed in USA, Poland, Ukriane, Australia, Taiwan, Thailand,ect
1, Are you trading company or manufacturer?
We are manufacturer, and also provide the business solution to all the friends.
2, How can we place the order?
Please advise the following information,then we can quote you accordingly:
1)the drawing in detail or the dimension of the finished products.
2)the connection detailed picture of the punching blade and the punching mould .
3)Material of the final product(paper,metallized paper,plastic or aluminum foil ).
3,What's the delivery time?
Around7~8days after pre payment received, however, based on order.
4, Can you help us to buy other goods?
Sure of that, it is our honor to work for you, and control the goods quality.
If you are interested in our machine and moulds, please contact with us as following in details: